Ask our Experts, we're here to help!
Superchips offers the easiest and most cost-effective solution to your new Jeep Rubicon 392’s performance needs by adding it to Flashpaq’s tuning support. With the ability to add up to 14 HP and 16 ft-lb torque with 93 octane fuel, the Flashpaq has been specifically calibrated to enhance the driving experience in your vehicle with no engine modifications. Flashpaq contains tuning for the engine, as well as all the Quick Options features of Flashcal (listed below). The Flashpaq kit for Jeep JL also includes a PCM Swap, which means the cost of unlocking your vehicle’s PCM is included in the its price.
Whether you’re hitting a trail off-road, looking for better fuel mileage on your daily commute, or simply need a boost to all-out acceleration and performance, Flashpaq has you covered. The device comes preloaded with performance tunes for 93 and 91 octane fuel for the best power and efficiency (MPG), and a 91 octane compatible Crawl Tune. Our purpose-built Crawl tune has a recalibrated throttle curve (controlling the engine response to pedal input) that is linear, for precise modulation while easing over steep obstacles at low speeds.
Flashpaq and Flashcal (below) have always had the commonly available adjustable options, like re-calibrating the speedometer for changes to tire size and axle gear ratio. Thanks to advancements to the vehicles themselves, and the extensive research of our calibrators, a host of useful “Quick Options” have been added. Items in the Quick Options list below are available in both Flashpaq and Flashcal, and take seconds to apply because they do not require a reflash of the PCM (engine control module).
Tuning any Jeep vehicle built in 2015 or later requires a PCM unlock to allow reading and writing of files, but Superchips has made this step as painless as possible with the included PCM swap. When you take delivery of your new Flashcal kit, submit this form and we will send an unlocked PCM up front for quick installation and no vehicle down time:
A prepaid return shipping label will be included to send your original PCM back as a core trade-in.
Tire and wheel upgrades are common with Jeep vehicles in general, and Superchips offers the easiest, most cost-effective solution for Wrangler owners to correct a speedometer reading for changes to tire height or axle ratio. The Flashcal plugs into the truck’s diagnostic port and the user only has to input their new tire size and/or gear ratio changes to return the speedometer to an accurate calibration. The adjustment can be completed in minutes, and you’ll rest assured your speedometer and odometer are displaying accurately to keep your time on the highway safe and legal!
In addition to speedometer calibration, Flashcal also offers numerous customizations to your vehicle’s features not typically available to the end user, such as setting the TPMS warning threshold or disabling it altogether for off-road use, customized fog light control, auto start/stop disabler, sway bar system control, and much more.
NOTE: Flashcal does not require a PCM swap or modification. However, a Gateway Bypass Module (included in all kits for this application) must be installed while any adjustment or tuning is being performed on this vehicle.
See Quick Options list below for all available settings on Flashcal.
A frequent inquiry we get in the field is how to reduce or eliminate the lag in pedal response after certain modifications, like bigger tires. This can often be a complaint with completely unmodified Jeeps!
Superchips Amp’D 2.0L Throttle Sensitivity Booster is easy to install and delivers immediate improvement to the engine’s throttle response. This increased sensitivity optimizes your Wrangler’s driving experience and puts the power to the ground faster! Amp’d 2.0 offers an elegantly simple solution that generates “seat of the pants” response you won’t find anywhere else.
Amp’d 2.0 (5) preset throttle settings that can be switched on the fly, and an intuitive plug-and-play installation to factory connectors without cutting or splicing wires. Settings are adjustable through our wireless switch, or the all-new Amp’d 2.0 smartphone app which includes an option to create custom pedal map curves.
While Flashpaq does offer solid power improvements, some Rubicon 392 owners wish to tighten up pedal response and recalibrate specific accessories without completely reprograming the engine control. Combining an Amp’D 2.0 Throttle Booster and Flashcal will fill that void, with a relatively small output of money and time.
The pairing of Flashcal and Amp’D 2.0 Throttle Booster make for an easy install, and reward on investment that few other modifications can match.